■With one fiber and four UTP ports, can convert Optical-Electric Ethernet signals between 10/100M UTP interface (TX) and 100M optical fiber interface (FX).
■Auto negotiation function allows UTP port to auto select 10M or 100M, and Full Duplex or Half Duplex.
■Support Flow control and Broadcast storm protection.
■Supporting the max 1536 bytes frame.
■Internal Circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction.
■ With LED indicators for monitoring the working status.
■Operating standards: IEEE802.3u 100Base-TX and 100Base-FX
UTP: RJ-45, 10/100Mbps;
Fiber: SC/FC/ST, 100Mbps (Full Duplex)
UTP cable: Cat. 5 (the max distance up to 100m)
Fiber (multimode): 50/125, 62.5/125μm (the max distance up to 2km)
Fiber (single mode): 8/125, 8.7/125, 9/125, 10/125μm (the max distance up to 120km)
Full Duplex: IEEE802.3x flow control
Half Duplex: bake pressure flow control
■LED Light: L/A-FX, FDX-FX, L/A-TP, SPD-TP,FDX-TP,PWR
■Power supply： AC85～240V, DC5V 1A;
■Environment temperature：0 ～ +50℃
■Storage temperature:：：-20 ～ +70℃
■Humidity:：5% ～ 90%